---

 

Install Computer or Pc Memory!
Tech Support Page!

 

 

 

Tech Support Installing Computer Pc Memory!
By Raymond, WebTechGeek.com

Tech Support Install Pc Memory.

The Steps Install Pc Memory Chips:

 

Installing a memory module

1. Shut down your computer and turn off all peripheral devices, such as your printer.
2. Unplug your computer and any peripheral devices.
3. Remove the side panel.
4. Gently place the unit on its side. If necessary, remove any cables, add-on cards, or other components to access the memory module slots.

   To remove the power supply (for PCV-RX series model only)

   1. Remove the screw that secures the power supply unit to the chassis.
   2. Pull the tab that releases the power supply from the chassis.
   3. Slide the power supply unit up until it clears the chassis.
   4. Rotate the power supply to an upside down position and rest it beside the chassis.
5. Remove the memory module from its anti-static package, handling it by the the edges.
6. Locate the notch on the bottom edge of the module to align it over the open memory slot.
7. Firmly insert the bottom edge of the memory module into the slot.
8. Press down evenly against the module's upper corners. The end latches snap into position, holding the module in place.

 

To avoid damaging a memory module slot, move the end latches slightly outward to relieve pressure. The module clicks into place.

To avoid damaging a memory module slot, move the end latches slightly outward to relieve pressure. The module clicks into place.

Removing a memory module

1. Shut down your computer and turn off all peripheral devices, such as your printer.
2. Unplug your computer and all peripheral devices.
3. Remove the side panel.
4. Gently place the unit on its side. If necessary, remove any cables, add-on cards, or other components to access the memory module slots.

   To remove the power supply (for PCV-RX series model only)

   1. Remove the screw that secures the power supply unit to the chassis.
   2. Pull the tab that releases the power supply from the chassis.
   3. Slide the power supply unit up until it clears the chassis.
   4. Rotate the power supply to an upside down position and rest it beside the chassis.
5. Locate the memory module(s) you wish to remove.
6. Push down on the latches, located on both sides of the module, to gently eject it from the slot.
7. Grasp one edge of the module and lift it out. Store the module in a static-free bag.

More software downloads

More Tech Support Pages: More How To's List

---

 

---

Install Computer or Pc Memory!
Tech Support Page!

 

 

---

HOT Software Downloads!
- With eBlaster Software - Know EXACTLY what your employees & family members are doing -
on the Internet & Pc. eBastor Software Download.